ADJ LED Pixel Tube 360 SYS 10 Set of 10 Color Changing LED Tubes and 10 Ch Driver

•  39.5-inch/ 1000mm TRI LED Color Tube with UV-resistant polycarbonate tubing
•  64 Bright TRI LEDs
•  Built-in color macros (When using the LED Pixel 4C or LED Pixel 10C Controllers)
•  Long life LEDs (50,000 hr. rating)
•  RGB Color Mixing
•  Strobe & Pulse LED Effect
•  Runs extremely cool! - NO Duty Cycles! - Run all night!
•  Visible for 360 degrees
•  Can only be used with either LED Pixel 4C or LED Pixel 10C controller
• With Wired Digital Communication Network
•  Power input: DC 24V, 4-pin input power cable with female connector
•  Refresh Rate: 60Hz
•  Power consumption: 15W per LED tube
•  Dimensions (LxWxH): 39.5”x2”x2” / 1000 x 50 x 50mm
•  Weight: 2 lbs. / 0.5 kgs

 PIXEL 10C Controller

The 10-Channel Controller for the LED Pixel Tube 360 made by ADJ is the number one tool for a musician or DJ that wants manual control of their light show. There are 24 built-in programs and it is sound activated too. For even larger displays that will be out of this world, you can daisy chain the 10-Channel Controller to another 10-Channel Controller. Also for your convenience ADJ has built in a reversible, hanging/truss bracket just to make your life a little easier. In addition to the 10-channel driver/controller, you can purchase the ADJ RC wireless remote control so that you can control the display from anywhere.
      
ADJ's 10C Driver/controller for the LED Pixel Tube 360 will give you the light display that you are looking for with the capabilities of having 360 degrees of bright LED light tubes hanging all around the stage with 64 bright TRI LEDs.  This is the way to rock out!

•  10-Channel Driver/Controller for LED Pixel Tube 360
•  Great for the Musician or DJ that wants manual control of his light show
•  Linkable via 3-pin XLR cable In/Out to other LED Pixel 10C
•  24 built-in programs
•  4 DMX Channel Modes (5, 7, 32 & 480 Ch.)
•  Sound Active
•  DMX-512 Protocol
•  Electronic Dimming: 0 - 100%
•  4-button LED display
•  Built-in, reversible, hanging/truss bracket
•  Compatible with ADJ LED RC wireless remote control (sold separately)
• With Wired Digital Communication Network
•  IEC AC Power In/Out on rear to daisy chain power (Power connect up to 3 LED Pixel 10C)
•  Power Draw: 200W max
•  Multi-voltage Operation: AC 120 or 240V, 50/60Hz 
•  Dimensions (LxWxH): 12.75” x 11.25” x 3.25” / 318 x 280 x 80mm
•  Weight: 10 lbs. / 4.2 kg.